|
LOG_MODULE_CLRTL. This error is due to. The default facility code |
|
BTH_ERROR CODE_HOST_REJECTED_SECURITY_REASONS. This error is due to. The default facility code |
|
LDAP_SASL_BIND_IN_PROGRESS. This error is due to. The default facility code |
|
MSIDBERROR CODE_BADPATH. This error is due to bad path. The default facility code |
|
IME_RS_DISKERROR CODE. This error is due to disk I. The default facility code |
|
IAAPI_BADINDX. This error is due to . The default facility code |
|
NRC_NAMTFUL. This error is due to . The default facility code |
|
MSG_CONFLICTING_CERT_TYPE. This error is due to The request specifies conflicting certificate templates %1. The default facility code |
|
SNMP_ERROR CODE_COMMITFAILED. This error is due to. The default facility code |
|
POLICY_ERRV_SUBNET_GRP_FLOW_DURATION. This error is due to. The default facility code |
|
RSVP_Err_UNKNOWN_CTYPE. This error is due to. The default facility code |
|
ODBC_ERROR CODE_INVALID_PARAM_SEQUENCE. This error is due to. The default facility code |
|
GE_SSC_ERR_OBJ_NOT_OPENED. This error is due to . The default facility code |
|
TWCC_CAPBADOPERATION. This error is due to . The default facility code |
|
SCESTATUS_SERVICE_NOT_SUPPORT. This error is due to. The default facility code |
|
MAPI_DIAG_NUMBER_CONSTRAINT_VIOLATD. This error is due to. The default facility code |
|
NO_USER_MODE_CONTEXT. This error is due to. The default facility code |
|
SNMP_ERROR CODESTATUS_COMMITFAILED. This error is due to. The default facility code |
|
MD_ERROR CODE_SUB403_DIR_LIST_DENIED. This error is due to. The default facility code |
|
KDC_ERR_ETYPE_NOTSUPP. This error is due to KDC has no support for encryption type. The default facility code |
|
ERROR CODE_OUTOFMEMORY. This error is due to Not enough storage is available to complete this operation. The default facility code |
|
MMSYSERR_BADDB. This error is due to. The default facility code |
|
EVENT_MSCEP_FAIL_TO_SIGN. This error is due to SCEP Add-on failed to sign the return CertRep (3) message (%2). %3 Please find support information at http . The default facility code |
|
NMERR_LOCKED. This error is due to. The default facility code |
|
MSG_E_CANNOT_LOAD_SERVER_KEYS. This error is due to Certificate Services did not start Unable to set up a cryptographic context for the CA certificate for %1. %2. The default facility code |
|
MSG_NO_DC_LOCATED. This error is due to The time provider NtpClient was unable to find a domain controller to use as a time source. NtpClient will try again in %1 minutes. The default facility code |
|
CR_NO_MORE_LOG_CONF. This error is due to. The default facility code |
|
NDDE_NOT_IMPLEMENTED. This error is due to. The default facility code |
|
ERROR CODE_OUTOFMEMORY. This error is due to Not enough storage is available to complete this operation. This region is reserved to map undecorated error codes into HRESULTs. |
|
E_OUTOFMEMORY. This error is due to Ran out of memory. This region is reserved to map undecorated error codes into HRESULTs. |
|
NTE_NO_MEMORY. This error is due to Insufficient memory available for the operation. The source of the error code is the Security API layer. |
|
STATUS_CTX_MODEM_RESPONSE_BUSY. This error is due to Busy signal detected at remote site on callback. The source of the error code is the control mechanism. |
|
INET_E_SECURITY_PROBLEM. This error is due to. The source of the error code is Wininet related. |
|
PST_E_BAD_FLAGS. This error is due to. The source of the error code is Wininet related. |
|
NS_E_NETWORK_BUSY. This error is due to The network is busy. %0. The source of the error code is the Windows Media Server. |
|
SCARD_E_CANT_DISPOSE. This error is due to The system could not dispose of the media in the requested manner. The source of the error code is the Smart-card subsystem. |
|
BG_E_VOLUME_CHANGED. This error is due to The destination volume has changed. If the disk is removable it might have been replaced with a different disk. Reinsert the original disk and resume the job. The source of the error code is background copy control |
|
ERROR CODE_FLT_CBDQ_DISABLED. This error is due to The callback data queue has been disabled. The source of the error code is the user mode filter manager. |
|
STATUS_CLUSTER_NODE_NOT_MEMBER. This error is due to The cluster node is not a member of the cluster. The source of the error code is. NET CLR. |
|
WCM_E_INVALIDLANGUAGEFORMAT. This error is due to Invalid language string format. The source of the error code is state management services. |
|
COPYENGINE_E_REMOVABLE_FULL. This error is due to Destination device is full and happens to be removable. The source of the error code is the user Shell. |
|
NAP_E_ENTITY_DISABLED. This error is due to The entity is disabled with the NapAgent service. The source of the error code is the user Shell. |
|
TPM_E_INAPPROPRIATE_ENC. This error is due to Unacceptable encryption scheme. |
|
FVE_E_AD_ATTR_NOT_SET. This error is due to The attribute was not set. The source of the error code is Full volume encryption. |
|
FWP_E_TXN_IN_PROGRESS. This error is due to The call is not allowed from within an explicit transaction. The source of the error code is the Firewall Platform. |
|
RTC_E_SIP_INVITE_TRANSACTION_PENDING. This error is due to Currently processing another INVITE transaction |
|
hrFullBackupNotTaken. This error is due to You must perform a full backup before you can perform an incremental backup. |
|
ISDSC_TOO_MANY_CONNECTIONS. This error is due to Too many Connections. |
|
TAPI_E_INVALCALLPARAMS. This error is due to Invalid LINECALLPARAMS structure. The source of the error code is COM/OLE Interface management. |
|
OLE_E_WRONGCOMPOBJ. This error is due to compobj. dll is too old for the ole2. dll initialized. The source of the error code is COM/OLE Interface management. |
|
COR_E_TARGETPARAMCOUNT. This error is due to There was a mismatch between number of arguments provided and the number expected. The source of the error code is a COM Dispatch. |
|
DISP_E_BADPARAMCOUNT. This error is due to Invalid number of parameters. The source of the error code is a COM Dispatch. |
|
RPC_NT_ALREADY_LISTENING. This error is due to The RPC server is already listening. The source of the error code is a COM Dispatch. |
|
RPC_E_SERVER_CANTUNMARSHAL_DATA. This error is due to The server (callee) cannot unmarshall the parameter data - low memory etc. The source of the error code is an RPC subsystem. |
|
STATUS_DEVICE_PAPER_EMPTY. This error is due to {Out of Paper} The printer is out of paper. The default facility code |
|
STATUS_IMAGE_MACHINE_TYPE_MISMATCH. This error is due to {Machine Type Mismatch} The image file %hs is valid but is for a machine type other than the current machine. Select OK to continue or CANCEL to fail the DLL load. The default facility code |
|
STATUS_NO_SUCH_DEVICE. This error is due to A device which does not exist was specified. The default facility code |
This error code 14 problem is really a big issue that's due to the hardware within your computer not remaining read correctly. The "hardware" of the PC is basically many of the physical components which your digestive system will be using to do, and are really important for the smooth operation of one's PC. Although the hardware is critical for your computer to perform correctly, this error suggests that some kind of temporary problem is preventing your laptop from to be able to run correctly.
This error normally shows with this format: "This device are unable to work properly before you restart your laptop computer. (Code 14)" and basically ensures that your system is not able to read a particular bit of hardware that your laptop or computer is using to run. To make sure it is possible to fix this concern, you first ought to resolve some of the issues that tend to be leading it to signify - which will comprise of everything from your printer not with the ability to read its settings / files efficiently to Windows experience settings errors.
How you can fix error code 14 is always to first use restart your laptop, as the problem your digestive system had was probably to do with a particular section of hardware. Restarting the body will basically refresh every one of the files and settings that happen to be causing it running slower, allowing your computer to jog much smoother consequently. For most many people, this should halt the error 16 message from listed.
On top of restarting your laptop, you also need every single child repair any with the potential problems which Windows have had inside your system, by first updating your computer and then with a "registry cleaner" technique. Registry cleaners happen to be software tools that may scan through typically the registry database of this computer and repair the potentially damaged settings which can be inside. The registry database can be a large central storage facility for all your settings and options that your chosen computer uses running, making it vital that your chosen system keeps many of these files & settings from the correct format. It could work case that certainly, there a registry errors on your personal computer preventing it through loading up in the correct way - meaning that if you wish to fix the error code 14 issue, you can get a registry purifier, install it and let it take care of any problems with your system. |
