|
ERROR CODE_FILE_NOT_FOUND. This error is due to The system cannot find the file specified. The default facility code |
|
STATUS_WAIT_2. This error is due to STATUS_WAIT_2 |
|
DS_NAME_ERROR CODE_NOT_FOUND. This error is due to. The default facility code |
|
SNMP_ERROR CODESTATUS_NOSUCHNAME. This error is due to. The default facility code |
|
DHCP_DROP_NOMEM. This error is due to. The default facility code |
|
DEVICE_QUEUE_NOT_BUSY. This error is due to. The default facility code |
|
ERROR CODE_LABEL_QUESTIONABLE. This error is due to Label could be invalid due to unit attention condition. The default facility code |
|
CR_OUT_OF_MEMORY. This error is due to. The default facility code |
|
TWCC_LOWMEMORY. This error is due to. The default facility code |
|
SNMP_ERROR CODE_NOSUCHNAME. This error is due to. The default facility code |
|
SNMP_GENERICTRAP_LINKDOWN. This error is due to. The default facility code |
|
POLICY_ERRV_GLOBAL_GRP_FLOW_COUNT. This error is due to. The default facility code |
|
SAM_PWD_CHANGE_PWD_IN_HISTORY. This error is due to. The default facility code |
|
MFE_NOT_FORWARDING. This error is due to not fwding for an unspecified reason. The default facility code |
|
SCESTATUS_RECORD_NOT_FOUND. This error is due to. The default facility code |
|
MD_ERROR CODE_SUB502_PREMATURE_EXIT. This error is due to. The default facility code |
|
MMSYSERR_BADDEVICEID. This error is due to. The default facility code |
|
EVENT_MSCEP_FAILED_TO_LOAD. This error is due to SCEP Add-on cannot be loaded (%1). %2. The default facility code |
|
MSG_TIMEPROV_WARNING. This error is due to The time provider %1 logged the following warning %2. The default facility code |
|
MD_ERROR CODE_SUB404_DENIED_BY_POLICY. This error is due to. The default facility code |
|
CMC_FAIL_BAD_REQUEST. This error is due to. The default facility code |
|
MD_ERROR CODE_SUB403_READ_ACCESS_DENIED. This error is due to. The default facility code |
|
MD_ERROR CODE_SUB401_LOGON_CONFIG. This error is due to. The default facility code |
|
MAPI_DIAG_MTS_CONGESTED. This error is due to. The default facility code |
|
CDERR_INITIALIZATION. This error is due to. The default facility code |
|
MSIDBERROR CODE_REQUIRED. This error is due to non-nullable column no null values allowed. The default facility code |
|
NDDE_BUF_TOO_SMALL. This error is due to. The default facility code |
|
BTH_ERROR CODE_NO_CONNECTION. This error is due to. The default facility code |
|
LOG_MODULE_EP. This error is due to. The default facility code |
|
LLC_STATUS_DUPLICATE_COMMAND. This error is due to. The default facility code |
|
NMERR_INVALID_HFILTER. This error is due to. The default facility code |
|
SE_CATEGID_LOGON. This error is due to Logon. The default facility code |
|
ODBC_ERROR CODE_INVALID_BUFF_LEN. This error is due to. The default facility code |
|
CMC_STATUS_FAILED. This error is due to. The default facility code |
|
ICERR_NEWPALETTE. This error is due to. The default facility code |
|
CATEGORY_STACK. This error is due to Stack. The default facility code |
|
RSVP_Err_POLICY. This error is due to. The default facility code |
|
LDAP_PROTOCOL_ERROR CODE. This error is due to. The default facility code |
|
RSVP_Erv_No_Serv. This error is due to . The default facility code |
|
KDC_ERR_SERVICE_EXP. This error is due to Server s entry in database has expired. The default facility code |
|
IAAPI_BADBIT. This error is due to . The default facility code |
|
MSG_BAD_DECRYPT. This error is due to Could not decrypt request. The default facility code |
|
IME_RS_NOIME. This error is due to IME is not installed. The default facility code |
|
SMART_INVALID_FLAG. This error is due to Invalid command flag. The default facility code |
|
HIDP_GETCOLDESC_BUFFER. This error is due to. The default facility code |
|
RSVP_Erv_API. This error is due to . The default facility code |
|
GPMC_E_SITENOTLOADED. This error is due to The %1 site could not be loaded and will be removed. The error message was %n%2. The default facility code |
|
SE_ERR_FNF. This error is due to file not found. The default facility code |
|
RSVP_Erv_Bandwidth. This error is due to . The default facility code |
|
POLICY_ERRV_UNSUPPORTED_CREDENTIAL_TYPE. This error is due to. The default facility code |
|
ERROR CODE_FILE_NOT_FOUND. This error is due to The system cannot find the file specified. This region is reserved to map undecorated error codes into HRESULTs. |
|
CO_E_SCM_ERROR CODE. This error is due to OLE service could not bind object. The source of the error code is the Windows subsystem. |
|
NTE_BAD_HASH. This error is due to Bad Hash. The source of the error code is the Security API layer. |
|
ERROR CODE_ALL_SIDS_FILTERED. This error is due to The SID filtering operation removed all SIDs. The source of the error code is the Security API layer. |
|
STATUS_CTX_INVALID_PD. This error is due to The protocol driver %1 is invalid. The source of the error code is the control mechanism. |
|
STATUS_MUI_INVALID_FILE. This error is due to The resource loader failed to load MUI file because the file fail to pass validation. The source of the error code is a certificate client or server? |
|
TRUST_E_ACTION_UNKNOWN. This error is due to The trust verification action specified is not supported by the specified trust provider. The source of the error code is a certificate client or server? |
|
INET_E_ERROR CODE_FIRST. This error is due to. The source of the error code is Wininet related. |
|
INET_E_INVALID_URL. This error is due to. The source of the error code is Wininet related. |
|
PST_E_PROV_DLL_NOT_FOUND. This error is due to. The source of the error code is Wininet related. |
|
NS_S_STREAM_TRUNCATED. This error is due to The stream was purposefully stopped before completion. %0. The source of the error code is the Windows Media Server. |
|
MQ_INFORMATION_ILLEGAL_PROPERTY. This error is due to The property ID is invalid. The source of the error code is the Microsoft Message Queue. |
|
MQ_ERROR CODE_PROPERTY. This error is due to One or more of the properties passed are invalid. The source of the error code is the Microsoft Message Queue. |
|
SPAPI_E_SECTION_NAME_TOO_LONG. This error is due to An INF section was encountered whose name exceeds the maximum section name length. The source of the error code is the Setup API. |
|
SCARD_E_CANCELLED. This error is due to The action was cancelled by an SCardCancel request. The source of the error code is the Smart-card subsystem. |
|
BG_E_INVALID_STATE. This error is due to The requested action is not allowed in the current job state. The job might have been canceled or completed transferring. It is in a read-only state now. The source of the error code is background copy control |
|
ERROR CODE_FLT_CONTEXT_ALREADY_DEFINED. This error is due to A context is already defined for this object. The source of the error code is the user mode filter manager. |
|
STATUS_CLUSTER_NODE_EXISTS. This error is due to The cluster node already exists. The source of the error code is. NET CLR. |
|
STATUS_CLUSTER_NODE_ALREADY_DOWN. This error is due to The cluster node is already down. The source of the error code is. NET CLR. |
|
WCM_E_STATENODENOTALLOWED. This error is due to State node is not allowed. The source of the error code is state management services. |
|
COPYENGINE_E_REQUIRES_ELEVATION. This error is due to Need to elevate the process to complete the operation. The source of the error code is the user Shell. |
|
NAP_E_MISSING_SOH. This error is due to An SoH was missing from the NAP packet. The source of the error code is the user Shell. |
|
TPM_E_BADINDEX. This error is due to The index to a PCR DIR or other register is incorrect. |
|
PLA_E_DCS_NOT_FOUND. This error is due to Data Collector Set was not found. The source of the error code is Performance Logs and Alerts |
|
FVE_E_NO_TPM_BIOS. This error is due to The BIOS did not correctly communicate with the TPM. Contact the computer manufacturer for BIOS upgrade instructions. The source of the error code is Full volume encryption. |
|
FWP_E_CONDITION_NOT_FOUND. This error is due to The filter condition does not exist. The source of the error code is the Firewall Platform. |
|
ERROR CODE_NDIS_INTERFACE_CLOSING. This error is due to The binding to the network interface is being closed. The source of the error code is the Network Driver Interface. |
|
E_IMAPI_REQUEST_CANCELLED. This error is due to The request was cancelled. |
|
RTC_E_SIP_STREAM_NOT_PRESENT. This error is due to The stream to be stopped is not present |
|
hrError. This error is due to An internal error has occurred. |
|
ISDSC_LOGIN_FAILED. This error is due to Login Failed. |
|
TAPI_E_NOITEMS. This error is due to No items exist that match the request. The source of the error code is COM/OLE Interface management. |
|
OLE_E_ENUM_NOMORE. This error is due to Can t enumerate any more because the associated data is missing. The source of the error code is COM/OLE Interface management. |
|
OLE_S_MAC_CLIPFORMAT. This error is due to Macintosh clipboard format. The source of the error code is COM/OLE Interface management. |
|
STG_E_FILENOTFOUND. This error is due to %1 could not be found. The source of the error code is OLE Storage. |
|
RPC_NT_SS_CHAR_TRANS_OPEN_FAIL. This error is due to The file designated by DCERPCCHARTRANS cannot be opened. The source of the error code is OLE Storage. |
|
STG_E_FILENOTFOUND. This error is due to The file could not be found. The source of the error code is OLE Storage. |
|
RPC_NT_WRONG_KIND_OF_BINDING. This error is due to The binding handle is not the correct type. The source of the error code is a COM Dispatch. |
|
RPC_E_CALL_CANCELED. This error is due to Call was canceled by the message filter. The source of the error code is an RPC subsystem. |
|
DBG_APP_NOT_IDLE. This error is due to Debugger has found the application is not idle. The source of the error code is an RPC subsystem. |
|
DBG_CONTINUE. This error is due to Debugger continued. The source of the error code is an RPC subsystem. |
|
DBG_UNABLE_TO_PROVIDE_HANDLE. This error is due to Debugger cannot provide handle. The source of the error code is an RPC subsystem. |
|
categoryUnused. This error is due to None. The default facility code |
|
S_OBJECT_NO_LONGER_VALID. This error is due to. The default facility code |
|
E_OUTOFMEMORY. This error is due to Ran out of memory. The default facility code |
|
categoryUnused. This error is due to None. The default facility code |
|
STATUS_DATATYPE_MISALIGNMENT. This error is due to {EXCEPTION} Alignment Fault A datatype misalignment was detected in a load or store instruction. The default facility code |
|
STATUS_NOT_IMPLEMENTED. This error is due to {Not Implemented} The requested operation is not implemented. The default facility code |
|
STATUS_WORKING_SET_LIMIT_RANGE. This error is due to {Working Set Range Error} An attempt was made to set the working set minimum or maximum to values which are outside of the allowable range. The default facility code |
